Technology & Engineering - General

A key aspect of cyber-physical systems (CPS) is their potential for integrating information technologies with embedded control systems and physical systems to form new or improved functionalities. CPS thus draws upon advances in many areas. This positioning provides unprecedented opportunities for innovation, both within...

This book is the result of a Special Issue published in Applied Sciences entitled "Low Binder Concrete and Mortars". The main aim of this work is to highlight practical approaches that facilitate the production of low binder content concrete and mortar with an acceptable...

In recent years, microfluidic devices with a large surface-to-volume ratio have witnessed rapid development, allowing them to be successfully utilized in many engineering applications. A smart control process has been proposed for many years, while many new innovations and enabling technologies have been developed...

Green technologies can be identified as key components in Industry 4.0. The scope of this book is to address how conventional green technologies can be a part of smart industries by minimizing waste, maximizing productivity, optimizing the supply chain, or by additive manufacturing. This...

Recent advancements in mechanical engineering are an essential topic for discussion. The topics relating to mechanical engineering include the following: measurements of signals of shafts, springs, belts, bearings, gears, rotors, machine elements, vibration analysis, acoustic analysis, fault diagnosis, construction, analysis of machine operation, analysis...

This Special Issue reports on recent research trends in hydraulics, hydrodynamics, and hydroinformatics, and their novel applications in practical engineering. The Issue covers a wide range of topics, including open channel flows, sediment transport dynamics, two-phase flows, flow-induced vibration and water quality. The collected...

This Special Issue reports on recent research trends in hydraulics, hydrodynamics, and hydroinformatics, and their novel applications in practical engineering. The Issue covers a wide range of topics, including open channel flows, sediment transport dynamics, two-phase flows, flow-induced vibration and water quality. The collected...

The use of sensors based on fibre optic technology allows a broad range of applications in the fields of structural and geotechnical monitoring, which can effectively improve the maintenance of infrastructures and the safety of communities. Thanks to its valuable features, such as distributed...

This book results from a Special Issue published in Energies, entitled "Building Thermal Envelope". Its intent is to identify emerging research areas within the field of building thermal envelope solutions and contribute to the increased use of more energy-efficient solutions in new and refurbished...

The Special Issue "Synthesis and Modification of Nanostructured Thin Films" highlights the recent progress in thin film synthesis/modification and characterization. New methods are reviewed for the synthesis and/or modification of thin films based on laser, magnetron, chemical, and other techniques. The obtained thin nanostructures...

Wave energy has a higher potential than most of the available ocean energy resources; however, it fluctuates dramatically depending on geographical and temporal baselines. The complexity of wave energy is only exacerbated by that fact that the cycle of creation, transport, and disappearance of...

This Special Issue presents the latest advances in the field of Textile-Reinforced Cement Composites, including Textile-Reinforced Concrete (TRC), Textile-Reinforced Mortar (TRM), Fabric-Reinforced Cementitious Matrix (FRCM), etc. These composite materials distinguish themselves from other fibre-reinforced concrete materials by their strain-hardening behaviour under tensile loading. This...

Modern factories are experiencing rapid digital transformation supported by emerging technologies, such as the Industrial Internet of things (IIOT), industrial big data and cloud technologies, deep learning and deep analytics, AI, intelligent robotics, cyber-physical systems and digital twins, complemented by visual computing (including new...

A new era of innovation is enabled by the integration of social sciences and information systems research. In this context, the adoption of Big Data and analytics technology brings new insight to the social sciences. It also delivers new, flexible responses to crucial social...

Industrial process tomography (IPT) is becoming an important tool for Industry 4.0. It consists of multidimensional sensor technologies and methods that aim to provide unparalleled internal information on industrial processes used in many sectors. This book showcases a selection of papers at the forefront...

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots...

"Engineering Fluid Dynamics 2018". The topic of engineering fluid dynamics includes both experimental as well as computational studies. Of special interest were submissions from the fields of mechanical, chemical, marine, safety, and energy engineering. We welcomed both original research articles as well as review...

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots...

This book was established after the 6th International Workshop on Numerical and Evolutionary Optimization (NEO), representing a collection of papers on the intersection of the two research areas covered at this workshop: numerical optimization and evolutionary search techniques. While focusing on the design of...

Preface Several countries have recently realized that the present paradigm of development in environmental and energy fields is unsustainable. As global awareness of environmental issues grows, governments worldwide are promoting policies which aim to limit the harmful effects of human development on the environment....

This book offers a collection of 17 scientific papers about the computational modeling of fracture. Some of the manuscripts propose new computational methods and/or how to improve existing cutting edge methods for fracture. These contributions can be classified into two categories: 1. Methods which...

Photovoltaic solar energy technology (PV) has been developing rapidly in the past decades, leading to a multi-billion-dollar global market. It is of paramount importance that PV systems function properly, which requires the generation of expected energy both for small-scale systems that consist of a...

The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the...

This book presents an interesting sample of the latest advances in optimization techniques applied to electrical power engineering. It covers a variety of topics from various fields, ranging from classical optimization such as Linear and Nonlinear Programming and Integer and Mixed-Integer Programming to the...

This text will provide the most recent knowledge and advances in the area of molecular computing and bioinformatics. Molecular computing and bioinformatics have a close relationship, paying attention to the same object but working towards different orientations. The articles will range from topics such...

Agriculture requires technical solutions for increasing production while lessening environmental impact by reducing the application of agro-chemicals and increasing the use of environmentally friendly management practices. A benefit of this is the reduction of production costs. Sensor technologies produce tools to achieve the abovementioned...

Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is...

Currently, the use of computational fluid dynamics (CFD) solutions is considered as the state-of-the-art in the modeling of unsteady nonlinear flow physics and offers an early and improved understanding of air vehicle aerodynamics and stability and control characteristics. This Special Issue covers recent computational...

In this reprint, several original pieces of research and reviews are collected on the topic of "Polymorphism in Crystals," including the crystal structure determinations, the phase transformation studies, the thermodynamic and dissolution properties studies, the regulation of polymorph by additives and templates, the intensifications...

Over the past decade, we have witnessed significant advancements in the label-free biosensing field. Label-free biosensors aim at detecting the target molecules or biological processes without labels, thus allowing evaluation of their intrinsic properties in their natural forms, as well as easy operations without...

This book collects papers addressing valuable techniques to improve the efficiency and performance of power electronics when applied to power grids and electrical drives. The proposed techniques leverage several approaches, e.g., advanced converter topologies, innovative control algorithms, and wide bandgap power devices. Diverse application...

This book delves into the realm of efficient intelligence, encompassing fundamental and applied research. It explores the applications of embedded sensing in a variety of embedded devices, including industrial robots, unmanned vehicles, elevator traction machines, fuel cells, and more. Special attention is given to...

The reprint offers a selection of high-quality research articles that tackle the major difficulties in computer vision and machine learning for intelligent sensing systems from both theoretical and practical standpoints. This publication includes intelligent sensing techniques, twelve foundational investigations into sense-making methods, and discusses...

This reprint is a collection of research that contributes to a better understanding of energy transfer related to alternative vehicles. The hybridization of power units and alternative propulsion systems are the mainly developed technology in the automotive field today. The modernization of conventional propulsion...

Over the last few decades, the field of fault diagnostics and structural health management has been experiencing rapid developments. The reliability, availability, and safety of engineering systems can be significantly improved by implementing multifaceted strategies of in situ diagnostics and prognostics. With the development...

Noise generated by aircraft continues to be a pressing issue for society, as an increasing number of people residing in close proximity to airports make noise complaints on a regular basis. The reduction in aircraft noise is therefore a very important engineering task that...

The Special Issue book focuses on highlighting current research and developments in the automation and control field for autonomous systems as well as showcasing state-of-the-art control strategy approaches for autonomous platforms. The book is co-edited by distinguished international control system experts currently based in...

The world needs an accelerated energy transition to meet sustainable development goals. Energy planning has a critical role in providing the information that can guide decision-makers, and energy planning methods continue to evolve rapidly. This Special Issue provides new insights for long-term energy planning,...

This book is a compilation of original research articles that apply a variety of techniques to identify and evaluate water resource management policies. These papers cover a wide range of topics and methodologies applied across the world, from a local to a continental scope....

The fundamentals of mechanical system dynamics were established before the beginning of the industrial era. The 18th century was a very important time for science and was characterized by the development of classical mechanics. This development progressed in the 19th century, and new, important...

The thirty-plus years of progress in the field of structural health monitoring (SHM) have left a paramount impact on our everyday lives. Be it for the monitoring of fixed- and rotary-wing aircrafts, for the preservation of the cultural and architectural heritage, or for the...

The combination of physical sensors and computational models to provide additional information about system states, inputs and/or parameters, in what is known as virtual sensing, is becoming increasingly popular in many sectors, such as the automotive, aeronautics, aerospatial, railway, machinery, robotics and human biomechanics...

Nowadays, the optimization of different engineering devices demands the use of "smart" liquids that have a high thermal conductivity. Such "smart" liquids, known as nanofluids, are the suspension of a base liquid (water, oil, and others), and nanosized particles of metal, metal oxide, or...

Over the last few decades, an increasing amount of interest from academia and industry has been devoted to the application of the 12 Principles of the green chemistry in order to pursue the Sustainable Development Goals (SDG). They are based on the fundamental idea...

Digital Twins in Industry is a compilation of works by authors with specific emphasis on industrial applications.Much of the research on digital twins has been conducted by the academia in both theoretical considerations and laboratory-based prototypes. Industry, while taking the lead on larger scale...

This Special Issue gathers topics of utmost interest in the field of antennas and propagation, such as: new directions and challenges in antenna design and propagation; innovative antenna technologies for space applications; metamaterial, metasurface and other periodic structures; antennas for 5G; electromagnetic field measurements...

This Special Issue aims at providing the state-of-the-art on procedures and methodologies developed to improve energy and environmental performance through building renovation. We are greatly thankful to our colleagues building physics experts, building technology researchers, and urban environment scholars who contributed to this Special...

Papers published in metals in 2020 and 2021, related to the special issue "News trends in powder metallurgy: microstructures, properties, durability. a review of the scientific advances in this field have been carried out through a selection of 13 original research papers (progress reviews...

Microgrids have recently emerged as the building block of a smart grid, combining distributed renewable energy sources, energy storage devices, and load management in order to improve power system reliability, enhance sustainable development, and reduce carbon emissions. At the same time, rapid advancements in...

The transport sector, which is currently almost completely based on fossil fuels, is one of the major contributors to greenhouse gas emissions. Heading towards a more sustainable development of mobility could be possible with more energy efficient automotive technologies such as battery electric vehicles....