E-Bike Maintenance Manual: A Step-by-Step Guide to Battery Care, Brakes, Drivetrain, and Troubleshooting for Every Rider (Paperback) (ISBN-13: 9798187949304)

Your e-bike gives you more power, more range, and more fun on every ride - but it also comes with more systems that need care than a regular bike. A dead battery, a squealing brake, or a skipping chain can turn a good commute into a bad afternoon, and most riders don't know what to check first, how often, or what to leave alone.

E-Bike Maintenance Manual gives you a clear, step-by-step system for keeping every part of your e-bike working the way it should - without guesswork, without a mechanic on speed dial, and without the risk of making a small problem worse.

WHAT YOU GET

This book walks you through the entire e-bike, system by system: how to read your parts map and terminology, build a mileage-based maintenance schedule, run a five-point safety check before every ride, and choose the right tools for the job. From there, you'll learn hands-on care for every major system - cleaning without frying your electronics, battery charging and storage rules that protect your range, tire pressure and tubeless setup, flat repair, brake pad selection and adjustment, hydraulic bleeding, drivetrain cleaning and chain wear testing, lubrication, shifting and derailleur troubleshooting, wheel truing and bearing checks, suspension service, torque specs for handlebar and stem, motor and sensor troubleshooting, display and assist tuning, rust prevention, and winter storage.

ALL 40 CHAPTERS

1. E-Bike Parts Map and Terminology
2. Your Maintenance Schedule Setup
3. Safety Checks Before Every Ride
4. Tools You Actually Need
5. Cleaning Without Damaging Electronics
6. Battery Care and Storage Rules
7. Charging Habits for Maximum Cycles
8. How to Inspect Battery Health
9. Tire Pressure and Ride Feel Tuning
10. Tubeless vs Tubes: Maintenance Differences
11. Fixing a Flat Tire Step-by-Step
12. Choosing Brake Pads for Your Setup
13. Brake Adjustment and Cable Tension
14. Disc Brake Bedding-In for Quiet Power
15. Hydraulic Brake Bleeding Basics
16. Drivetrain Cleaning and Degreasing
17. Chain Wear Testing and Replacement
18. Lubrication Types for E-Bikes
19. How to Lubricate Like a Pro
20. Shifting Troubleshooting Guide
21. Derailleur Limit Screws Explained
22. Cable Routing and Housing Inspection
23. Bottom Bracket and Crank Play Check
24. Wheel Truing and Spoke Tension Basics
25. Bearing Inspection for Hubs and Wheels
26. Truing Disc Rotors and Brake Alignment
27. Suspension Fork Service Intervals
28. Adjusting Suspension for Rider Weight
29. Handlebar, Stem, and Torque Specs
30. Seatpost and Saddle Height Adjustments
31. Chainline, Derailleur Clearance, and Rub
32. E-Bike Motor Mount and Cable Checks
33. Troubleshooting No-Assist Power
34. Fixing Intermittent Assist Cuts
35. Cadence vs Torque Sensor Alignment
36. Display, Modes, and Assist Tuning
37. Wheel Speed Sensor and Magnet Setup
38. Water, Salt, and Rust Prevention
39. Winter Storage and Pre-Ride Revival
40. When to DIY vs Use a Shop

HOW IT WORKS

Every chapter follows the same practical structure: a real-world scenario, a clear system or checklist you can use immediately, common mistakes to avoid, and a quick-reference takeaway - so you always know what to check first and why. Reference values for torque, tire pressure, and other specs are included as general guidance, with a reminder to confirm against your own bike's manual before any safety-critical adjustment.

FOR WHOM

This book is for e-bike owners who want to stop guessing - commuters who rely on their bike daily, weekend riders who want fewer surprises, and anyone who'd rather catch a problem early than pay for one later. No mechanical background required.

Author: David Kirste
ISBN-13: 9798187949304
Publisher: Independently Published
Language: English
Published: 07/19/2026
Pages: 294
Format: Paperback
Weight: 0.87lbs
Size: 9.00h x 6.00w x 0.62d