Machining Fundamentals Handbook 2026: A Professional Textbook Covering Print Reading, Measurement, and Shop Operations for Metalworking Apprentices (Paperback) (ISBN-13: 9798180349156)

The diameter on the print said 0.750 minus 0.003, you hit 0.750 dead on, and the part still came back rejected.

That gap - between hitting a number and matching the print - is where good stock turns to scrap, taps snap off in blind holes, and tools burn blue while an inspector waits.

Machining Fundamentals Handbook 2026 closes that gap, walking you from the print to a finished, in-tolerance part on every job, conventional or CNC.

Inside these pages:

- Tolerance as a window, not a target - turn any bilateral, unilateral, or limit callout into an upper limit, a lower limit, and a deliberate aim point that survives normal variation
- Speeds and feeds without the guesswork - convert surface feet per minute to spindle RPM in your head, chain it through chip load and flute count to a feed rate, and read the chip to confirm you got it right
- The tap-drill calculation that saves taps - size any hole to roughly 75 percent thread by subtracting the pitch from the major diameter, before you ever chuck a drill
- GD&T that earns you tolerance - decode a feature control frame, work from the datums, and claim the bonus tolerance at maximum material condition that saves a part you'd otherwise scrap
- Order of operations that won't trap you - sequence a stepped shaft so the way you hold it never blocks the next cut
- The trial-cut method - measure, calculate what's left, and dial in a diameter instead of guessing
- CNC that runs on real machining judgment - set work offsets, prove a program, and dial in size through tool offsets

This is for machining apprentices, CNC and manual machinists, manufacturing technology students, and anyone preparing for NIMS credentialing.

Author: Jonathan R. Clifford
ISBN-13: 9798180349156
Publisher: Independently Published
Language: English
Published: 06/06/2026
Pages: 160
Format: Paperback
Weight: 0.85lbs
Size: 11.00h x 8.50w x 0.34d