Optical Polymer Waveguides: From the Design to the Final 3d-Opto Mechatronic Integrated Device by Franke, Jörg

Optical Polymer Waveguides: From the Design to the Final 3d-Opto Mechatronic Integrated Device (Hardcover) (ISBN-13: 9783030928537)

Vendor: Jg Franke
Product type: Books
Format: Hardcover
$139.99
$139.99
$139.99
Subtotal: $139.99
Optical Polymer Waveguides: From the Design to the Final 3d-Opto Mechatronic Integrated Device by Franke, Jörg

Optical Polymer Waveguides: From the Design to the Final 3d-Opto Mechatronic Integrated Device

$139.99
Optical Polymer Waveguides: From the Design to the Final 3d-Opto Mechatronic Integrated Device by Franke, Jörg

Optical Polymer Waveguides: From the Design to the Final 3d-Opto Mechatronic Integrated Device

$139.99
Format: Hardcover
Description
Description
x
Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components? This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges.

Author: Jg Franke
ISBN-10: 3030928535
ISBN-13: 9783030928537
Publisher: Springer
Language: English
Published: 12/07/2022
Pages: 278
Format: Hardcover
Weight: 1.35lbs
Size: 9.13h x 5.91w x 0.32d
By Jg Franke
By Jg Franke
x
Prof. Dr.-Ing Jg Franke is head of the Institute for Factory Automation and Production Systems (FAPS) at Friedrich-Alexander-University of Erlangen-Nuremberg (FAU).
Prof. Dr.-Ing. Ludger Overmeyer heads the Institute of Transport and Automation Technology (ITA) at the Leibniz University Hannover and is a member of the management board of the Institute of Integrated Production Hannover (IPH). In November 2009 Prof. Dr.-Ing. Overmeyer has become a member of the Executive Board of Laser Zentrum Hannover e.V

apl. Prof. Dr. rer. nat. Norbert Lindlein leads the group "Optical Design, Microoptics and Measurement (ODEM)" of the Institute of Optics, Information and Photonics at the Friedrich-Alexander University of Erlangen-N?nberg (FAU).

Prof. Dr.-Ing. Dr. h.c. mult. Karlheinz Bock is the head of the Institute of Electronic Packaging Technology (IAVT) at the Technische Universit舩 Dresden.

Prof. Dr.-Ing. Stefan Kaierle is Executive Board Member at the Laser Zentrum Hannover e.V. and Professor for Laser Additive Processing at the Leibniz University Hannover.

Dr.-Ing. Oliver Suttmann is responsible for the Production & Systems Department at the Laser Zentrum Hannover e.V.

Prof. Dr.-Ing. habil. Dr. h. c. mult. Klaus-J?gen Wolter is emeritus professor and former head of the Institute of Electronic Packaging Technology (IAVT) at the Technische Universit舩 Dresden.

Recently Viewed Products